![]() ![]() To do this, make sure the goggles are connected to the small black battery and it's turned on. First make sure the goggles are powered on. Next, you're going to link the aircraft with the remote controller. That means everything is linked and everything is working properly. After about 30 seconds, the goggles will stop beeping and you will see a live view inside the goggles. Grab your drone, press and hold the battery for at least five seconds until you hear that same beeping sound. After you press that red dot, you will hear a beeping noise. ![]() What I would do is take your hex key, or use take anything that has a small point, and you press down on that red dot. On the goggles, you're going to see this little small red dot. ![]() So turn on the drone, the battery, the controller, and the goggles. So to link the goggles, you have to make sure everything is turned on. And if you just bought the DJI FPV, you can skip this step and go on to the Activation step, which is the next step after this. So I'm going to show you how to do that right now. However, if you crash your drone and get a new drone, or if you use a different controller or something like this, you're going to have to link them together. If you bought the combo, everything is already linked. Now before we activate the drone and get into the DJI fly app, you have to make sure the drone and controller and goggles are linked together. So you need that OTG cable - one end is connected to the goggles, the other end is connected to the cable, and at the other end of the cable, you can connect that into your device. (Click video up top to see visual demonstration of this). You're going to need the OTG cable, the USB-C end into the goggles, and the USB end goes into a normal data cable. You want to do the same thing with the remote controller and the goggles battery. To turn on the battery, you press it once and then you press it again immediately and hold it down for a couple of seconds and the battery will turn on. Once everything is charged, you take the battery and put it into the drone like this and make sure you push all the way in so it's secure. I use the footage on the goggles as a backup in case I crash the drone, I still have the footage. So the drone is going to have much better quality footage than on the goggles. However, the footage on the card inside the goggles is not going to be as good as the card inside the drone. I would also recommend putting a microSD card into your goggles as well. So it might be a good idea to carry multiple cards, maybe multiple 128GB cards rather than one 256GB card. And if it's a really expensive card that can be a bummer. Keep in mind, if you crash your drone or something happens to it and you lose that card, then that card is lost. I would recommend 128GB because they will give you enough record time if you decide to buy a 256GB card. SanDisk Extreme Pro makes great microSD cards. Now the DJI FPV can hold a microSD card up to 256GB. are in the description below the video at the start of this article. A link to the gimbal cover, other accessories, batteries, etc. And if you lose the gimbal cover, don't worry, DJI sells extra gimbal covers on its website. So I always recommend you have that cover on when you don't use it. When the drone is OFF, make sure the gimbal cover is on the drone, and this will help maintain the integrity of the gimbal for a really long time. Always have the gimbal cover off when you turn ON the drone. Next, remove the gimbal cover, and then the film that's on the gimbal camera so nothing happens to the camera when you turn it on. This way it is up to date and everything is running properly. So I uninstall the DJI Fly app, and delete it completely from my phone and then I reinstall it. I found that sometimes the app is glitchy. Next thing you want to do is download the DJI Fly app, whether you have an Android or an Apple device. But if you got the charging hub, you could charge all the batteries together if you wanted to do that. You only need to charge one battery for the drone for the next step. Charge the controller and the goggles as well. The first thing I do when I get a new drone is I charge all the batteries. It's very rare that DJI will forget the parts, but I always like to make sure by putting it out on a table and check it off and make sure they're all there. Setupįirst things first, what I always like to do is just open up the box and take out all the parts and make sure you have all the parts. So if you just got a DJI FPV drone, I'm going to do my best to get you set up and get out there and start flying. This is a complete beginner's guide to the DJI FPV. Brett Garamella, the Drone Pilot Pro here. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |